Table of Contents
Advertisement
3.
Align the three receptors on the CMA with the connectors on the rack rails.
Intermediate rail connector
Pivot receptor
The installation steps in this section uses a Left pivot configuration as an example, the
installation steps for a Right pivot configuration is similar.
4.
Align and connect the inner
receptor on the CMA with the
connector on the inner rail.
5.
Align and connect the outer
receptor on the CMA with the
connector on the intermediate
rail.
3-12
Inner rail connector (hidden)
Inner receptor
Intermediate rail
connector
Outer receptor
Chapter 3: Installation Options
Advertisement
Table of Contents
