Table of Contents
Advertisement
2.4
Storage devices
The system supports 24 hot-swap 2.5-inch storage devices on the front panel.
To install a 2.5" hot-swap storage device to the front panel:
1.
Switch the secure lock upward to release the tray lever.
2.
Pull the tray lever outward. The drive tray ejects slightly after you pull out the lever.
Firmly hold the tray lever and pull the drive tray out of the bay and put it on a flat
surface.
Secure lock
Tray lever
3.
Release the screws on each side of the
drive tray to release the drive tray metal
beam.
The metal beam supports the drive
tray horizontally to prevent the drive
tray from benting or deforming.
ASUS RS720-E9-RS24-E
metal beam
2-15
Advertisement
Table of Contents
