2.10.3
8 x NVMe storage device configuration and cabling
•
The illustrations in this section are for reference only and may vary between models.
•
You may still support either SATA for bays 1 to 12 or SAS for bays 1 to 8 with this
configuration, for more information please refer to the following sections:
- SATA support for bays 1 to 12: 12 x SATA storage device configuration and
cabling
- SAS support for bays 1 to 8 and SATA support for bays 9 to 12: 8 x SAS and 4 x
SATA storage device configuration and cabling
Backplane connector
MCIO_P1
MCIO_P2
MCIO_P3
MCIO_P4
1.
Install the storage devices into the supported bays.
Refer to section Storage Devices for details on how to install storage devices.
NVMe
NVMe
2.
Remove the rear and backplane covers. For more information, refer to Removing the
rear cover and Removing the backplane cover.
ASUS RS700A-E12 Series
Cable
MCIO to MCIO
MCIO to MCIO
MCIO to MCIO
MCIO to MCIO
NVMe
NVMe
NVMe
NVMe
Connect to
MCIOPCIE1 on motherboard
MCIOPCIE2 on motherboard
MCIOPCIE3 on motherboard
MCIOPCIE4 on motherboard
NVMe
NVMe
2-43