12 X Nvme Storage Device Configuration And Cabling - Asus RS700A-E12 Series User Manual

2.10.4

12 x NVMe storage device configuration and cabling

•
•
Backplane connector
MCIO_P1
MCIO_P2
MCIO_P3
MCIO_P4
MCIO_P5
MCIO_P6
1. Install the storage devices into the supported bays.
Refer to section Storage Devices for details on how to install storage devices.
NVMe
NVMe
2. Remove the rear and backplane covers. For more information, refer to Removing the
rear cover and Removing the backplane cover.
2-46
The illustrations in this section are for reference only and may vary between models.
You may still support one of the following configurations with this configuration, for
more information please refer to the following sections:
- SATA support for bays 1 to 12: 12 x SATA storage device configuration and
cabling
- SAS support for bays 1 to 8 and SATA support for bays 9 to 12: 8 x SAS and 4 x
SATA storage device configuration and cabling
Cable
MCIO to MCIO
MCIO to MCIO
MCIO to MCIO
MCIO to MCIO
MCIO to MCIO
MCIO to MCIO
NVMe NVMe
NVMe NVMe
Connect to
MCIOPCIE1 on motherboard
MCIOPCIE2 on motherboard
MCIOPCIE3 on motherboard
MCIOPCIE4 on motherboard
GENZPCIE5 on motherboard
GENZPCIE6 on motherboard
NVMe NVMe
NVMe NVMe
Chapter 2: Hardware Information
NVMe
NVMe