Advertisement
GENERAL INFORMATION
Save these instructions. For your safety,
read, understand, and follow the information
provided with and on this lift. The owner and
operator of this equipment shall have an
understanding of this lift and safe operating
procedures before attempting to use. The
owner and operator shall be aware that
use and repair of this product may require
special skills and knowledge. Instructions
and safety information shall be conveyed in
the operator's native language before use
of this lift is authorized. If any doubt exists
as to the safe and proper use of this jack,
remove from service immediately.
Inspect before each use. Do not use if
broken, bent, cracked, or damaged parts
(including labels) are noted. Any lift that
appears damaged in any way, operates
abnormally or is missing parts, shall be
removed from service immediately. If
the lift has been or suspected to have
been subjected to a shock load (a load
dropped suddenly, unexpectedly upon
it), immediately discontinue use until lift
has been checked by a factory authorized
service center. It is recommended that an
annual inspection be done by qualified
personnel. Labels and Owner's Manuals
are available from manufacturer (see
Replacement Parts, page 5).
PRODUCT DESCRIPTION
The Pro-Lift Motorcycle/ATV Lift is
specifically designed to lift and support
up to rated capacity loads consisting of a
single Motorcycle, ATV, Snowmobile, Water
Craft or Riding Lawn Mower whose frames
are compatible with the lifting members of
the lift. This lift is NOT suitable for lifting,
leveling and/or positioning cars, trucks,
SUV's or conveyances other than those
specifically listed and approved above.
This lift is NOT suitable for lifting, leveling
and/or positioning houses, construction
trailers and dwellings in general. This
product does not contain independent lifting
devices, but is designed to be permanently
assembled. Hydraulic unit is not to be used
independently of the lift.
!
WARNING
• Study, understand and follow all
instructions before operating this
device.
• Do not exceed rated capacity.
• Use only on hard, level surfaces.
• Center load on lift pads.
• Lift only on areas of the vehicle
specified by it's manufacturer.
• Immediately after lifting load, ensure
lift mechanical load holding means is
engaged.
• Before moving, lower the load to
lowest possible point.
• Secure load with appropriate restraint
device.
• Use of this product is limited to lifting,
lowering, transporting and storing in
the lowered position, loads consisting
of a single vehicle whose lift points
are compatible with the lift platform.
Incompatiblity is evident when the
loaded motorcycle/ATV wobbles,
appears unstable, and/or does not
securely engage the lift platform.
• Restriaining an incompatible load will
not make the load secure and may
cause unexpected loss of load.
• Never work on, around or under a
load that is not secured and stable.
• Keep operator's and bystander's
head, hands and feet away from lift
arms when raising and lowering.
• No alterations shall be made to this
product.
• Only attachments and adapters
supplied by the manufacturer shall be
used.
• Failure to heed these markings
may result in personal injury and/or
property damage.
2
Advertisement
