Table of Contents
Advertisement
Quick Links
Mower Lift
Operating Instructions & Parts Manual
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
Model
T-5500
500 lbs.(227 kg) (wheel brackets)
T-5501
750 lbs. (340 kg) (platform)
Shinn Fu (Australia) PTY. LTD.
15 Viewtech Place, Rowville, Victoria 3178, Australia
Capacity
US Patent No. 8,469,338
Advertisement
Table of Contents
Related Manuals for Pro-Lift T-5500
Summary of Contents for Pro-Lift T-5500
- Page 1 Mower Lift Operating Instructions & Parts Manual Model Capacity T-5500 500 lbs.(227 kg) (wheel brackets) T-5501 750 lbs. (340 kg) (platform) US Patent No. 8,469,338 This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
-
Page 2: Safety And General Information
SAFETY AND GENERAL INFORMATION PRODUCT DESCRIPTION Save these instructions. For your safety, read, The Pro-Lift Mower Lift is specifically designed to lift, understand, and follow the information provided with and and support, up to rated capacity loads consisting of a on this lift. - Page 3 PREPARATION (ref. Fig. 1) position used to lower the ram plunger. 3. With Ram fully retracted and release valve closed, pump 1. Before using this product, read the operator’s manual Lift Pedal. If Ram responds immediately, bottle jack is completely and familiarize yourself thoroughly with the ready for use.
-
Page 4: Maintenance
Release Knob by turning it fully clock- putting jack into service. Replace worn or damaged parts wise. Do not work around or under load unless Height and assemblies with Pro-Lift authorized replacement Locking Lever is properly engaged. parts only. -
Page 5: Troubleshooting
Lubrication 2. Lay the unit on its side and drain hydraulic fluid into a suitable container. A periodic coating of light lubricating oil to pivot points, axles and hinges will help to prevent rust and assure that NOTICE: Dispose of used hydraulic fluid in accordance wheels, casters and pump assemblies move freely. - Page 6 Positioning Handle T-5500-7 Height Locking Lever Springs T-5500-8 Wheel Bracket, Left T-5500-9 Wheel Bracket, Right T-5500-10 Platform Pads, Rubber T-5500-12 Release Knob T-5500-11 Hardware Kit T-5500-L0 Labels (not shown) T-5500-MO Owner’s Manual Figure 4 - Replacement Parts Illustration for Model T-5500...
- Page 7 T-5501 REPLACEMENT PARTS Item Part No. Description T-5500-1 Front Wheel Assembly T-5500-2 Locking Swivel Caster Assembly T-5501-3 Hydraulic Unit Assembly (items 4, 11 and 12 not included) T-5500-4 Lift Pedal T-5500-5 Height Unlocking Lever T-5500-6 Positioning Handle T-5500-7 Height Locking Lever Springs...
-
Page 8: Warranty
WARRANTY 1. This product is covered by an express warranty for 12 months from the date of purchase by the original purchaser. Subject to the conditions of this warranty Shinn Fu Australia Pty Ltd will replace the product or provide necessary parts on the product if the product is found to be faulty within the warranty period due to defect in material or workmanship.