Pro-Lift T-2300 Owner's Manual
  1. Manuals
  2. Brands
  3. Pro-Lift Manuals
  4. Lifting Systems
  5. T-2300
  6. Owner's manual

Pro-Lift T-2300 Owner's Manual

Working load limit 680 kg utility/atv lift
Hide thumbs
1
2
3
4
5

Advertisement

Table of Contents

Model: T-2300
WORKING LOAD LIMIT 680 KG
UTILITY/ATV LIFT
OWNER'S MANUAL
WARNING
!
To avoid crushing and related injuries:
NEVER work on, under or around a load supported only by
a jack. Ensure locking devices are fully engaged.
Imported by
SHINN FU AUSTRALIA PTY. LTD.
15 Viewtech Place, Rowville 3178 VIC Australia
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the T-2300 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Pro-Lift T-2300

Summary of Contents for Pro-Lift T-2300

  • Page 1 Model: T-2300 WORKING LOAD LIMIT 680 KG UTILITY/ATV LIFT OWNER’S MANUAL WARNING To avoid crushing and related injuries: NEVER work on, under or around a load supported only by a jack. Ensure locking devices are fully engaged. Imported by SHINN FU AUSTRALIA PTY. LTD.

  • Page 2: Intended Use

    SAVE THESE INSTRUCTIONS For your safety please read, understand and follow the information contained within before use. The owner and operator shall have an understanding of this product and safe operating procedures before attempting to use. Instructions and safety information shall be conveyed in the operators native language before use is authorized. Make certain that the operator thoroughly understands the inherent dangers associated with the use and misuse of the product.

  • Page 3: Parts List

    PARTS LIST ITEM DESCRIPTION ITEM DESCRIPTION Base Washer 8 Link Spring Washer 8 Lift Saddle Bolt M8 x 30 Connecting Rod Bolt M8 x 25 Handle Locking Rod 15 x 18 Locking Screw Washer 16 Return Spring Locking Pin Hydraulic Ram Bolt M5 x 25 Foot Pedal Assembly Release Pedal...
  • Page 4 INSPECT BEFORE EACH USE Do not use if cracked, broken, bent or otherwise damaged parts are noted or if the lift is suspected to have been subjected to a shock load. A shock load is caused by rapidly opening and closing the release valve while the lift is loaded.

  • Page 5: Care And Maintenence

    CARE AND MAINTENENCE NOTE: When lift is not in use, lifting arm should be stored in the fully retracted position. Keep lift clean and well lubricated. Apply a couple of drops of light machine to all pivoting joints as needed. Thoroughly wipe up excess oil to help prevent slipping and falling.

Table of Contents