Safety And General Information; Product Description; Specifications - Pro-Lift T-5500 Operating Instructions & Parts Manual

Mower capacity lift 500 lbs.(227 kg) (wheel brackets) 750 lbs. (340 kg) (platform)
Table of Contents

Advertisement

SAFETY AND GENERAL INFORMATION

Save these instructions. For your safety, read,
understand, and follow the information provided with and
on this lift. The owner and operator of this equipment shall
have an understanding of this lift and it's safe operating
procedures before attempting to use. The owner and
operator shall be aware that use and repair of this product
may require special skills and knowledge. Instructions and
safety information shall be conveyed in the operator's
native language before use of this lift is authorized. If
any doubt exists as to the safe and proper use of this lift,
remove from service immediately. Inspect before each
use. Do not use if broken, bent, cracked or dam-aged
parts are noted. Any lift that appears damaged in any way,
or operates abnormally shall be removed from service
immediately. If the lift has been or is suspected to have
been subjected to a shock load (a load dropped suddenly,
unexpectedly upon it), immediately discontinue use until it
has been examined by a Pro-Lift authorized service center.
It is recommended that an annual inspection be done by
qualified personnel. Labels and Operator's Manuals are
available from the manufacturer (see Replacement Parts,
pg. 6 & 7).

SPECIFICATIONS

Base Size (L x W)
136 cm x 43cm
Lift Platform
Wheel Bracket
Height
Locking Lever
Height Unlocking
Lever
Lift Surface
Capacity
Platform
227 kg
Wheel Bracket
340 kg
Locking Swivel
Casters
Figure 1 - Model T-5500/T-5501 Nomenclature

PRODUCT DESCRIPTION

The Pro-Lift Mower Lift is specifically designed to lift,
and support, up to rated capacity loads consisting of a
single riding lawn mower whose frame is compatible with
the lifting platform. Incompatibility is evident when the
loaded mower wobbles, feels unstable, and/or does not sit
securely on the lift platform. This product is NOT suitable
for lifting, leveling and/or positioning automobiles, trucks,
SUV's or conveyances other than those specifically listed
and approved above. This product is NOT suitable for
lifting, leveling and/or positioning houses, construction
trailers and dwellings in general. This product does not
contain independent lifting devices, but is designed to be
permanently assembled. The Hydraulic Unit is not to be
used independently of the lift.
Compatible Wheel Track
N/A
141 cm outside span
Crosshead
Assembly
Positioning
Ram
Handle Pin
Oil Filler
Plug
Air Operated
Hydraulic Unit
2
Min. Height
Max. Height
78.7 cm
11.5 cm
68.5 cm
Release Knob
Ram
Handle
Sleeve
Oil Filler
Plug
Manual
Hydraulic Unit
Air
Coupler
Air
Motor
Lift Pedal

Advertisement

Table of Contents
loading

This manual is also suitable for:

T-5501

Table of Contents