Advertisement
3
FIT AND SECURE
3.2
2.2
3.3
Center the rack and tighten fully. Finish off by placing M8 Nut Caps over the M8 Nyloc Nuts.
COMPLETION
4
4.1
Congratulations! You did it. Take a step back and admire your work!
INSTALL OTHER VEHICLE AND RACK ACCESSORIES
5
Now's the time to visit your favorite Front Runner Dealer in person or online.
FRONT RUNNER RACK KITS OFTEN HAVE A HIGHER LOAD RATING THAN THE VEHICLES THEY ARE MOUNTED TO. PLEASE REFER TO YOUR SPECIFIC VEHICLE MANUFACTURER
FOR A RECOMMENDED ROOF RATING. FRONT RUNNER CANNOT BE RESPONSIBLE FOR IMPROPER LOADING BEYOND THE VEHICLE MANUFACTURER'S STATED LOAD CAPACITY.
Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam
KRVA002T_REV_A00
IMPORTANT!
Share your adventures on:
Place your Tray on the vehicle positioning
all the feet so that they rest on top of the
roof rails.
Measure 150mm on the front of the roof rail
3mm
as shown and position the LH and RH front
5mm
Grab On Feet.
Fully tighten all the M6x50 Cap Screws to
secure the Tray onto the rails.
13mm
Tightening Torque 6Nm
Make sure there are no movement on
the rack after fully tightening all the
fasteners.
Refit the Front Cover Plates.
5
© 2021 FRONT RUNNER VEHICLE OUTFITTERS
Advertisement
