Front Runner Slimline II KRVA002T Quick Start Manual page 4

2
FIT AND SECURE
2.4
2.5
3 FIT AND SECURE
3.1
KRVA002T_REV_A00
Inner Grip
Outer Grip
Refer to GOFR001 fitment guide.
Remove the Front Covers from all the Base
Feet by loosening the two M5x10 Button
Head Screws.
Loosen and remove the M5 Cap Screw, M5
Spring Washer and Cap Screw Washer.
Loosley fit one Inner Grip and one Outer Grip
to each Grab On Foot using a M5 Cap Screw,
M5 Spring Washer and M5 Cap Screw
Washer removed.
Make sure that the wind deflector is
installed before you proceed to the next
step.
4 © 2021 FRONT RUNNER VEHICLE OUTFITTERS