Front Runner Slimline II KRVA002T Quick Start Manual page 3

2
FIT AND SECURE
2.1
2.2
2.3
KRVA002T_REV_A00
B
A
3
A
B
3
2
3
Assemble your Slimline II Tray, referring to
the RRSTUNI fitment guide.
Flip the Tray so that the bottom of the Tray
faces up.
Insert four M8x16 Hex Bolts into the Slat
machined slots as shown.
Insert four M8x30 Hex Bolts into the Slat
machined slots as shown.
Loosely assemble the two Grab On Foot Sets
(Item 3) onto the slats indicated in 2.2 as
shown using M8 Flat Washers and M8 Nyloc
Nuts.
Note the Spacers must be used on the rear
feet.
© 2021 FRONT RUNNER VEHICLE OUTFITTERS