Residual Risks; Preparation; Removing/Inserting The Battery; Checking The Charge Status Of The Battery - Parkside PPMA 20-Li B2 Instructions Manual

GB IE
the charging process and fur-
ther information can be found
in the separate operating in-
structions.

Residual risks

Even if properly operating and handling this
electric tool, some residual risks will remain.
Due to its construction and build, this elec-
tric tool may present the following hazards:
a) Lung damage, if suitable respiratory
protection is not worn;
b) Ear damage if working without ear pro-
tection.
c) Eye damage if no suitable eye protec-
tion is worn.
d) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Warning! During operation, this
electric tool generates an electro-
magnetic field which, under certain
circumstances, may impair the func-
tionality of active or passive medical
implants. To reduce the risk of seri-
ous or lethal injuries, we recommend
that persons with medical implants
consult their doctor and the manu-
facturer of their medical implant
before operating the machine.

Preparation

Removing/inserting the bat-
tery
1. To remove the battery (7) from the de-
vice, press the release button (6) on the
battery and pull the battery (7) out.
22
2. To insert the battery (7), push the bat-
tery (7) along the guide rail into the
device. You will hear it click into place.
Only insert the battery once
the battery-operated tool is
fully ready for use.
Checking the charge status
of the battery
The charge level indicator (9) signals the
state of charge of the battery (7) by illu-
minating the corresponding LED(s). To see
this, press the soft button (8) next to the
charge level indicator (9).
3 LEDs illuminated (red, orange and green):
Battery charged
2 LEDs illuminated (red and orange):
Battery partially charged
1 LED illuminated (red):
Battery needs to be charged

Charging the battery

If warm, allow the battery to cool
before charging.
PAP 20 B1 PAP 20 B3
Charging time
(min.)
PLG 20 A4
PLG 20 C1
PLG 20 A3
PDSLG 20 A1
PLG 20 C3
1. If necessary, remove the battery (7)
from the device.
2. Slide the battery (7) into the charging
slot of the charger.
3. Plug the charger into a socket.
4. Once charging is complete, disconnect
60 120
30 60