Connecting The Receiver (Rx-1); Typical Hookup Example - Onkyo UWL-1 Instruction Manual

Setting Up the UWL-1—Continued

Connecting the Receiver (RX-1)

• Before making any connections, read the
manuals supplied with your other compo-
nents.
• Don't connect the AC adapter until you've
completed and double-checked all connec-
tions.
Connection Color Coding
RCA-type audio connections are usually
color-coded: red and white. Use red plugs to
connect right-channel audio inputs and out-
puts (typically labeled "R"). Use white plugs
to connect left-channel audio inputs and out-
puts (typically labeled "L").
• To prevent interference, keep audio cables
away from power cords and speaker cables.

■ Typical Hookup Example

Supplied miniplug-
to-RCA audio cable
R L
Audio input
Powered
speakers
PHONES INPUT BASS TREBLE
O
A B
DIGITAL
2 WAY POWERED SPEAKER SYSTEM 2 WAY POWERED SPEAKER SYSTEM
10
Optical digital cable
VOLUME
OFF MAX
• Push plugs in all the way to
make good connections
(loose connections can cause
noise or malfunctions).
Optical Digital Jack
The UWL-1's optical digital jack has a shut-
ter-type cover that opens when an optical plug
is inserted and closes when it's removed.
Push the plug in all the way.
Caution:
• The optical cable is fitted with protective
caps. Before connecting it, remove the caps
and keep them in a safe place. When you
disconnect the cable, refit the caps.
• To prevent shutter damage, hold the optical
plug straight when inserting and removing.
Receiver (RX-1)
Optical input
Audio component with
optical digital input
Right!
Wrong!
AC adapter
Plug into
AC outlet