Connections; Connecting The Av Receiver; Connecting Your Speakers - Onkyo TX-NR709 Instruction Manual

Connections

Connecting the AV Receiver

Connecting Your Speakers

Connecting the Speaker Cables
The following illustration shows which speaker should be connected to each pair of terminals. If you're using only one
surround back speaker, connect it to the SURR BACK L terminals.
Front high
right
Surround
right
■
Screw-type speaker terminals
Strip 1/2" to 5/8" (12 to 15 mm) of insulation from
the ends of the speaker cables, and twist the bare
wires tightly, as shown.
■
Banana Plugs (North American models)
• If you are using banana plugs, tighten the speaker terminal before inserting the banana plug.
• Do not insert the speaker code directly into the center hole of the speaker terminal.
En
12
Front wide
right Front right
Surround
back right
Front wide
Front left left
Surround
back left
1/2" to 5/8" (12 to 15 mm)
Front high
left Center
Surround
left