Replacement of modules
4.7
Replace PCB2.1, Digital Connector
☞ 4.2 BeoLab 18 in service position 1
☞ 4.4 BeoLab 18 in service position 2
☞ 4.6 BeoLab 18 in service position 3
☞ 4.10 Remove PCB30, Digital Sound Engine
- Remove screws
5x
TX10
- Slide off cover
- Remove screws
- Lift up PCB2.1, Digital Connector
3x
TX10
- Disconnect cable
P102