Troubleshooting; Warranty - Dometic ROLLERBLIND CHAIN Installation And Operating Manual

Troubleshooting

➤ Blot gently to avoid creasing or damaging the fabric. Always leave the blind
deployed to dry thoroughly.
Cleaning windows
➤ Always ensure the blinds are fully stowed before cleaning windows. This will
prevent spoiling the blind fabric by splatter or sprays of water or detergent.
9 Troubleshooting
Fault
Guide wire tension too low
Guide wire too short
Guide wire broken
Guide wire blind not running smoothly
Fabric rolls off sides of ends of roller
10

Warranty

Refer to the sections below for information about warranty and warranty support.
10.1 Australia and New Zealand
If the product does not work as it should, please contact your retailer or the
manufacturer's branch in your country (see dometic.com/dealer). The warranty
applicable to your product is 1 year(s).
For repair and warranty processing, please include the following documents when
you send in the device:
• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
10
Solution
➤ See chapter "Fitting the guide wire ver-
sions" on page 8.
➤ Order replacement guide wire, see
spares leaflet at dometic.com.
➤ Order replacement guide wire, see
spares leaflet at dometic.com.
➤ Check restraint position and recess
dimensions.
➤ Check if the guide wires are perpendicu-
lar to the roller and that the roller is hori-
zontal.
Rollerblind Chain
EN