Ot Her Funct Ions; Labeling The Rotary Commander; Qh Enter Button - Sony CDX-4000X Operating Instructions Manual

5
To return to the normal radio reception,
press (ENTER) .
Tip
To erase or correct a name, ent er " _" (under-bar)
f or each charact er.
Displaying t he st at ion nam e
Press (DSPL) during radio reception.
Each time you press (DSPL), the item
changes as follows:
Station name * y Frequency
* If t he st at ion name of a st at ion is not st ored,
" NO NAM E" appears in t he display f or one
second.
Erasing t he st at ion nam e
1
Tune in a station w hose name you w ant
to erase.
2
Press (MENU) , then press either side of
(PRST) repeatedly until "NAM E DEL"
appears.
3
Press (ENTER) .
4
Press (ENTER) for tw o seconds.
The name is erased.
Repeat steps 1 through 4 if you want to
erase other names.
5
Press (MENU) tw ice.
The unit returns to the normal radio
reception mode.
Note
When you erase all of t he st at ion names, " NO
NAM E" appears in st ep 4.
Downloaded from: https://www.usersmanualguide.com/

Ot her Funct ions

You can also control the unit with a rotary
commander.
Labeling t he rot ary
com m ander
Depending on how you mount the rotary
commander, attach the appropriate label as
shown in the illustration below.
D S P L
M O D E
S O U N D
S O U N D
M O D E
D S P L
13