Storing The Station Names; - Station M Emo - Sony CDX-4000X Operating Instructions Manual

If FM st ereo recept ion is poor
— M onaural M ode
1
During radio reception, press (MENU) ,
then press either side of (PRST)
repeatedly until "M ONO-OFF" appears.
2
Press the (+) side of (SEEK/AMS) until
"M ONO-ON" appears.
The sound improves, but becomes
monaural ("ST" disappears).
3
Press (ENTER) .
To return to normal mode, select
"MONO-OFF" in step 2.
Aut om at ical recept ion f requency
adjust m ent
— IF AUTO function
If interference occurs, the "IF AUTO" function
of this unit will automatically avoid noise and
narrow the reception frequency. In such cases,
some FM stereo broadcasts may become
monaural. If you would like to hear such
broadcasts in stereo, manually switch to the
"WIDE" setting.
1
During radio reception, press (MENU) ,
then press either side of (PRST)
repeatedly until "IF AUTO" appears.
2
Press the (+) side of (SEEK/AMS) until
"WIDE" appears.
3
Press (ENTER) .
Note
When you w iden t he f requency signal recept ion
set t ing (" WIDE" mode), some int erf erence may
occur.
12
Downloaded from: https://www.usersmanualguide.com/
St oring t he st at ion nam es
— Station M emo
You can assign a name to each radio station
and store it in memory. The name of the
station currently tuned in appears in the
display. You can assign a name of up to eight
characters for a station.
St oring t he st at ion nam es
1
Tune in a station w hose name you w ant
to store.
2
Press (MENU) , then press either side of
(PRST) repeatedly until "NAM E EDIT"
appears.
3
Press (ENTER) .
4
Enter the characters.
1 Press the (+) side of (PRST)
repeatedly to select the desired
characters.
(A t B t C t ··· Z t 0 t 1 t 2 t
··· 9 t + t – t * t / t \ t > t <
t . t _ )
If you press the (–) side of (PRST)
repeatedly, the characters appear in the
reverse order.
If you want to put a blank space
between characters, select "_" (under-
bar).
2 Press the (+) side of (SEEK/AMS) after
locating the desired character.
The next character flashes.
If you press the (–) side of (SEEK/AMS),
the previous character flashes.
3 Repeat steps 1 and 2 to enter the
entire name.