Checking Coupling Connection (Test Lock); Checking Coupling Connection (Test Lock); Inspecting The Coupling Status - Hyundai TRANSLEAD Original Operator's Manual

Checking coupling connection (test lock)

Using the lowest forward gear and the engine idling, move the
tractor forward to check if the fifth wheel is properly engaged and
locked.
™
NOTE
If the fifth wheel is not fully engaged and locked, it will release and
the tractor will move forward. If this happens, properly engage and
lock the fifth wheel again.

Inspecting the coupling status

Inspect the following for coupling status. If necessary, use a
flashlight during inspection.
• Ensure there is no space between the upper coupler and fifth
wheel.
• Ensure the fifth wheel's jaws lock around the kingpin shank.
• Ensure the fifth wheel's locking lever is in the "Locked"
position.
• Ensure there is proper clearance among the air lines and
7-way connector cable.
WARNING
You must perform a visual inspection and verify a proper coupling. A
visual inspection is required by law.
Copyright © 2022 Hyundai Translead
OPERATOR'S MANUAL Operation
63