Hyundai TRANSLEAD Original Operator's Manual page 53

NOTICE
• Federal Law requires the rear impact guard to meet the
specifications listed in the Federal Motor Vehicle Safety
Standards 49 CFR Sections 571.223 and 571.224. These federal
standards include the requirements on strength and energy
absorption, dimensional measurements as to width and road
surface to lower horizontal member clearance, and certification of
testing.
• At the time of manufacture a label or plate attesting to the
certification is placed on the forward-facing surface of the lower
horizontal member verifying it meets all standards. Do not remove
or alter this label. Doing so is prohibited by law.
• You must take the photographs of any accident involving the rear
impact guard to accurately show the condition of the trailer and
structure and any vehicle or vehicles involved. These
photographs should be taken at the time of the accident and
before performing any repairs. The following views of the
photographs should be taken.
- Overall views of the trailer and impacting vehicle or vehicles
from different angles showing the positions of all vehicles
involved in relation to each other and to the roadway
- Views of the relative condition of the trailer structure
- Views of damaged areas
- Close-up views of the damaged areas, including any
surrounding structures
Copyright © 2022 Hyundai Translead
OPERATOR'S MANUAL Operation
53