Operating the trailer
Preparations before coupling
Follow the instructions on inspecting the trailer and tractor below
before coupling.
Inspecting the tractor's fifth wheel and trailer's kingpin
Exit the tractor and inspect the fifth wheel and kingpin.
• Check for corroded, damaged, or missing parts (plate, release
lever, jaw, and fasteners) on the fifth wheel.
• Check if mounting to the tractor is secure.
• Check if the fifth wheel plate is in the correct position for
coupling.
- The fifth wheel is tilted down at the rear.
- The jaws are open.
- The release lever is in the automatic lock position.
• Lock the fifth wheel in place if your fifth wheel is the sliding
type.
• Check if there is enough lubricant on the plate.
• Check the kingpin for damage.
Inspecting the area around the trailer and tractor
Inspect the area for proper coupling and exterior of the trailer.
• Check if the area is level and firm enough to support the
landing gear.
• Check if the trailer parking brakes are applied.
• Check if the cargo is properly secured.
58
Copyright © 2022 Hyundai Translead