Table of Contents
Advertisement
Operating the trailer
Supplying air to the trailer
1.
Enter the tractor, open the trailer supply valve to supply air to
the trailer brake system, and wait until the air pressure
gauges indicate a normal range for the pressure level.
2.
Perform the following to check the brake system for crossed
air lines.
- Turn off the tractor's engine and check for air leaks in the
brake system.
- Apply the service brakes, check if the air pressure is within
the normal range and listen for air leaks at the service
gladhand.
3.
If there are no air leaks, turn on the tractor's engine.
Raising the landing gear
™
NOTE
For more information on each component of landing gear and
instructions, refer to "Landing gear" on page 23.
1.
Pull the crank handle of the landing gear to set it to the low
gear.
2.
Turn the crank handle clockwise until the landing gear is
completely raised and then secure the crank handle.
62
Copyright © 2022 Hyundai Translead
Advertisement
Table of Contents
