Table of Contents
Advertisement
About the trailer
Swing door assembly
The swing door assembly consists of the rear frame, two door
panels with perimeter molding, gasket seals, hinges, door-locking
hardware, lock rod, top and bottom keepers, and door hold
backs. It is designed to provide full-width access to the trailer rear
for loading/unloading and maximizing the net cargo area. Refer to
the following diagram for each component of the swing door.
™
NOTE
When the door is properly closed, the rear door lock rods and the
top and bottom keepers secure the door and hold the rear frame
and trailer sides square during transit. It is most important that the
lock rods and keepers temporarily unitize the doors and the rear
frame for water and near airtight seals.
Hinges
1
Cam keeper (top)
2
Locking rod
3
46
1
Door panel
4
Door handle
5
Cam keeper (bottom)
6
Copyright © 2022 Hyundai Translead
2
3
4
5
6
Advertisement
Table of Contents
