Door Assembly - Hyundai TRANSLEAD Original Operator's Manual

About the trailer
WARNING
• If the roof is damaged, the upper side walls also may be
damaged, which may result in buckling and a total collapse of the
trailer.
• Do not allow any moisture or chemicals to enter the walls or roof
through holes. Doing so may cause corrosion and add weight to
the trailer.
• Ensure the proper clearance to prevent the trailer's roof from
hitting other objects while operating the trailer.

Door assembly

There are two types of doors mounted on the trailer.
• Swing door
• Roll-up door
CAUTION
• Read and follow all safety instructions and labels attached to or
provided with the door.
• Regularly check the door assembly, including doors, hinges,
panels, frame, lock rods, lock rod keepers, and door hold back
securement devices for damage or distortions.
• Compression seals must be checked and repaired or replaced if
necessary to ensure a weatherproof closure to protect cargo.
• Interior linings or insulated doors should be checked for damage
or loose or missing fasteners and repaired as required.
• Safety equipment in the rear frame area, such as door hold
backs, grab handles, steps, ramps, and slip-resistant materials
must be inspected through the Trailer Preventive Maintenance
(TPM) program. Repair or replace them if necessary.
44
Copyright © 2022 Hyundai Translead