Calibration Label - Halma Ocean Optics DH-3PLUS-CAL Installation And Operation Manual

Calibration Label

A calibration label is attached to both the shipping box and the light source. The label identifies
the calibration performed on the unit (shown in red oval, below) and the date of the calibration,
as well as the serial number of the light source.
The calibration acronyms are defined in the following table:
Calibration Acronym
CC
CC EXT
BF
BF EXT
CC & BF
CC& BF EXT
355-00000-003-01
Description
Cosign Corrector - Standard Range
Cosign Corrector – Extended Range
Bare Fiber - Standard Range
Bare Fiber - Extended Range
Cosign Corrector and Bare Fiber
Cosign Corrector and Bare Fiber Extended Range
2: DH-3PLUS Specifications
9