Table of Contents
Advertisement
1: Setup
Models Available
The following models are available in the DH-3PLUS Series:
Model
Default
Calibration
Wavelength
(nm)
DH-CAL *
DH-3P-CAL
210-1100
DH-3P-BAL-CAL
230-1100
*Cosine Corrected
**Bare Fiber
The following sections provide instructions on unpacking and setting up your DH-3PLUS Series
Light Source.
Unpacking the DH-3PLUS Series Light Source
►
Procedure
1. Unpack your lamp assembly and power supply carefully. Although the lamp is rigidly
mounted, dropping this instrument can cause permanent damage.
2. Inspect the outside of the instrument and make sure that there is no damage. Do not use
the instrument if damage is present.
3.
Use this instrument in a clean laboratory environment (see
2
Optional Calibration Wavelength (nm)
DH-CAL-BF**
DH-EXT-CAL*
250-1100
210-2400
250-1100
230-2400
Balanced
Spectral
Output
DH-EXT-CAL-BF**
250-2400
No
250-2400
Yes
355-00000-003-01
Advertisement
Table of Contents
