Rear Panel - Halma Ocean Optics DH-3PLUS-CAL Installation And Operation Manual

2: DH-3PLUS Specifications

Rear Panel

Cooling Fan
Input Terminal for
Power Cord
TTL Input
Component
Main Power Switch
Fuse Compartment
Input Terminal for Power
Cord
TTL Input
Unit Label
Cooling Fan
8
Fuse Compartment
Description
Turn on to supply power to the unit. The Power LED lights when
this switch is in the ON position.
Contains the fuse to protect the unit against overload:
2.0 Amp, 250 V slow blow. Littlefuse part # 0218002
Plug power cord into this terminal.
Note: Only connect the power cable to the lamp when the Main
Power Switch is in the OFF position.
THE INSTRUMENT MUST BE CONNECTED TO A GROUNDED
(EARTHED) OUTLET
D-SUB 15-pin connector for automatic shutter control and remote
lamp enable
- Model
- Version
- Main connection
- Power consumption
- Max. Ambient Temperature 35°C
- Serial-No.
Cools the interior of the DH-3PLUS. Do not obstruct.
DH-3PLUS-CAL Deuterium-Halogen Lightsource
-or-
DH-3PLUS-BAL-CAL Deuterium-Halogen Lightsource
Europe / USA
110 / 240V 50-60Hz
80 Watt
xxxxxx
Unit Label
Main Power Switch
355-00000-003-01