Winterhalter UC Series Translation Of The Original Operating Instructions page 36

| |
English 6 Operation
Arranging the wash items in the wash rack
Ø Remove large pieces of food residues.
Ø Pour out beverage residues (outside the warewasher).
Ø Place plates with their upper surface facing forwards.
Ø Place glasses, cups, bowls and pots rim down.
Ø CAUTION! Possible risk of injury from sharp or pointed utensils when loading the wash racks! Wash cutlery up-
right in the cutlery holder or lying in the shallow wash rack. Always arrange the handle ends downwards. Make sure
that the cutlery is well-spaced.
Ø Do not overload racks, so that the wash water can reach all dirty surfaces.
Ø Space glasses to prevent them from rubbing against each other. This will avoid scratches.
Ø For tall glasses, choose a wash rack with appropriate divisions so that the glasses are held in a stable position.
Starting the washing programme
Ø Arrange the wash rack correctly.
Ø Open the door.
Ø Slide the wash rack into the warewasher.
Ø Close the door.
Ø Press the start button (1).
ð Start button turns blue.
ð For warewashers with an Energy module, the start button flashes blue-green before the end of the programme. At
the same time, the warm and humid air is extracted from the interior, and the heat energy stored in it is recovered
for the next washing programme.
ð Start button flashes green as soon as the washing programme ends.
Ø Do not open the door until the start button (1) flashes green.
Cancelling the washing programme
Wash breaks
Ø Do not switch the warewasher off during wash breaks.
Ø Close the door to prevent the machine from cooling down.
Activating an additional programme
The additional programme remains activated until it is deactivated or another additional or washing programme is selec-
ted.
36
1 2
|
89014383; Version 2
1
Ø Press button (1) or (2).
ð The start button lights up green.
|
Operating instructions UC-Serie