Table of Contents
Advertisement
In Deck, set the Sync Mode to Digital. For more information on word clock
settings in audio software, please see "Setting the word clock source in
digital audio software," on page 16.
3.
Devices which accept external word clock
Some S/PDIF devices, on the other hand, may allow you to freely select
between internal and external word clock. Some may use a dedicated word
clock input; others may use the clock signal received at their S/PDIF input.
When using the 1212 I/O with these devices, you don't need to change
word clock settings between recording and playback. Instead:
1.
2.
3.
4.
You can also use a dedicated word clock source as the master for the
1212 I/O. In this case, connect the word clock output of the master device
to the word clock input of the 1212 I/O, and set the 1212 I/O's word clock
source to S/PDIF•Word Clock.
Korg 880D/A
The 880D/A provides the 1212 I/O with an additional 8 high-quality
analog outputs. The 880D/A connects directly to the 1212 I/O's ADAT
optical output, so setup is very simple.
1.
You don't need to make any word clock settings on the 880D/A; it will
automatically slave to its ADAT optical input.
2.
If you are using the 1212 I/O and 880D/A as a stand-alone system, set the
word clock source to Internal. If you are using the 1212 I/O in combination
with other digital audio devices, see this manual's instructions for those
devices.
Korg 1212 I/O
When playing back into the S/PDIF device from a digital audio
program, set the 1212 I/O's word clock source to Internal (or ADAT,
if you generally use an ADAT system as the master clock source).
Connect the digital audio cables between the S/PDIF input and
output of the 1212 I/O and the S/PDIF device.
If the S/PDIF device has a dedicated word clock input, connect the
word clock output of the 1212 I/O to the word clock input of the
S/PDIF device.
Set the S/PDIF device to use the external clock source.
In the digital audio program, set the 1212 I/O's word clock source to
Internal or ADAT, as desired.
Connect the optical output of the 1212 I/O to the optical input of the
880A/D.
In the digital audio program, set the 1212 I/O's word clock source as
desired.
System Configurations
13
Advertisement
Table of Contents
