Table of Contents
Advertisement
Installation
8.
9.
The Korg 1212 I/O Software Welcome dialog will appear.
10. Follow the on-screen instructions.
The on-screen instructions will walk you through the rest of the
installation.
Audio connectors
Korg engineers worked valiantly to squeeze an incredible number of
inputs and outputs onto the 1212 I/O's relatively small jack panel. To
produce such a densely packed piece of digital audio real estate, they used
a number of breakout cables–that is, cables with a single connector on one
end, fanning out to two or three connectors on the other.
The analog inputs and outputs use 1/4" TRS (tip-ring-sleeve) connectors to
carry stereo, unbalanced signals, similar to a stereo headphone jack. You
can use standard "insert" cables to bring these signals out to a pair of 1/4"
mono connectors. We've provided special, custom cables for use with the
S/PDIF and Word Clock & ADAT Sync connectors.
The 1212 I/O jack panel
8
In the Run dialog box, type the following command:
A:\setup.exe
Press OK.
Stereo Analog Input
Stereo Analog Output
ADAT Optical Input
ADAT Optical Output
S/PDIF Breakout Connector
Word Clock & ADAT Sync
Breakout Connector
Korg 1212 I/O
Advertisement
Table of Contents
