Using Headphones; Connecting Audio Components - Korg HT-10 Owner's Manual

Silencing the acoustic piano sound
As shown in figure 3, pull the lever of the mute unit
located on the bottom panel of the piano toward
yourself, and lower the lever to lock it into place. To
go back to playing the acoustic piano conventionally,
return the lever to its original position.
Even if the piano is silenced, there may be some
leakage of the acoustic piano sound if you play a
chord strongly.
Don't operate this lever while you're playing

Using headphones

The HT-10 features two headphone jacks, so that two people can enjoy playing and lis-
tening.
Connect a pair of stereo headphones by inserting a stereo headphone mini plug into
one of the headphone jacks on the front of the sound module. (Figure 2)
To protect your hearing, do not listen to loud, high-volume sounds for a long pe-
riod of time through headphones.

Connecting audio components

You can use the PHONES/LINE jacks as line-out jacks to connect powered speakers or
audio components to the keyboard. For these connections, use commercially available
cables that are appropriate for the components that you're using.
Before connecting audio components, make sure that you turn off the power to the
unit and the audio components. Otherwise, damage or malfunction to the unit or
components may occur.
4
Figure 3