Opt iona l c om pone nt s
Connecting a digital
component
(U .S.A. m ode l only)
You can connect a digital component using a
digital cable (optical, optional).
You can record from the connected component on
an MD digitally.
Refer to the instructions of each component.
To the digital output jack of a digital
component
84
Downloaded from:
https://www.usersmanualguide.com/
, Connect a digital cable (optical,
optional).
OPTICAL IN
1
OPTICAL IN
2
3
3Connect to the digital output jack of the digital
component.
• When you record on a tape, analog recording is
performed.
T ip
To listen to or to record from the connected digital
component, press FUNCTION repeatedly until "OPT
IN" appears in the display.
1Remove the
cover of the jack.
2Connect the
optical cable.