Recording On A Tape Manually - Sony DHC-ZX50MD Operating Instructions Manual

Re c ording on a T a pe
Recording on a tape
manually
You can record from a CD, MD, tape, or radio as
you like. For example, you can record just the
songs you want or record from the middle of the
tape. The recording level is adjusted
automatically.
?/1
(Power)
64
Downloaded from:
Multi stick
2
x PUSH ENTER
. >
3 ,8
https://www.usersmanualguide.com/
1
Insert a recordable tape into deck B.
2
Press FUNCTION repeatedly until the
source you want to record appears.
• CD: Insert a CD. To start from a specific
track, create a program (See
"Programming the CD tracks" on page
28).
• MD: Insert a MD. To start from a specific
track, create a program (See
4
"Programming the MD tracks" on page
34).
• Tape: Insert a tape with the side you want
to play facing forward.
• Radio: Tune in the preset station you want
(See "Listening to the radio" on page 20).
When you want to record from optional AV
components, see "Optional components" on
page 84.
3
Press TAPE REC PAUSE/START.
Deck B stands by for recording. The
TAPE B N indicator (for front side) lights.
4
Press MODE SELECT repeatedly to
select "Set Up Mode", then press PUSH
ENTER.
5
Move the multi stick toward b or B
repeatedly to select "TAPE Set Up ?",
then press PUSH ENTER.
6
Move the multi stick toward b or B
repeatedly to select "Direction Set
1
Up ?", then press PUSH ENTER.
7
Move the multi stick toward b or B
repeatedly to select "1 Way" to record
on one side, or "Cycle" (or "Relay") to
record on both sides, then press PUSH
ENTER.