Table of Contents
Advertisement
To
Do this
Press x.
Stop play
Press CD NX (or X on the
Pause
remote). Press again to resume
play.
During play or pause, press > (to
Select a track
go forward) or . (to go back).
Press and hold down M or m
Find a point in
a track
during play and release it at the
desired point.
Select a CD
Press one of the DISC 1~5 buttons
in stop mode
(or DISC SKIP on the remote).
Play only the
1 While in stop mode, press
CD you have
MODE SELECT repeatedly to
selected
select "Set Up Mode", then press
PUSH ENTER.
2 Move the multi stick toward b or
B repeatedly to select "CD Set
Up ?", then press PUSH ENTER.
3 Move the multi stick toward b or
B repeatedly to select "Play
Mode Set Up ?", then press
PUSH ENTER.
4 Move the multi stick toward b or
B repeatedly to select "Play
Mode 1 Disc", then press PUSH
ENTER.
Play all CDs
1 While in stop mode, press
MODE SELECT repeatedly
to select "Set Up Mode", then
press PUSH ENTER.
2 Move the multi stick toward b or
B repeatedly to select "CD Set
Up ?", then press PUSH ENTER.
3 Move the multi stick toward b or
B repeatedly to select "Play
Mode Set Up ?", then press
PUSH ENTER.
4 Move the multi stick toward b or
B repeatedly to select "Play
Mode All Discs", then press
PUSH ENTER.
Press one of the A 1~5 buttons.
Remove a CD
Press one of the A 1~5 buttons
Exchange other
CDs while
to open the tray that contains
playing
the CD that you want to change.
When you change the CD, press the
same button to close the tray.
Adjust the
Turn VOLUME (or press VOL +/–
volume
on the remote).
Downloaded from:
https://www.usersmanualguide.com/
T ips
• Pressing CD NX when the power is off
automatically turns the power on and starts CD
playback if there is a CD in the tray (One Touch
Play). When the system is in the Power Saving
Mode, the One Touch Play function does not work.
• You can switch from another source to the CD
player and start playing a CD just by pressing
CD NX or one of the DISC 1~5 buttons
(Automatic Source Selection).
• If there is no CD in the player, "No Disc" appears
in the display.
• When a disc tray is holding a CD, the indicator for
the tray lights orange. In the display, when a disc
tray holding a CD is selected (or the CD in the disc
tray is playing), the disc pointer indicator lights.
When a disc tray holding a CD is not selected, the
disc presence indicator lights, but the disc pointer
indicator does not light. When all disc trays are
empty, all the disc pointer indicators and all the disc
presence indicators light.
N ot e
When a tray has not been read by the unit, the disc
presence indicator may light even though there is no
disc on the tray.
13
Advertisement
Table of Contents
