M a k ing a spa c e be t w e e n t ra c k s
3 se c onds long (c ont inue d)
?/1
(Power)
1
Press MD REC.
The MD deck is now ready for recording.
2
While in recording pause, press MODE
SELECT repeatedly to select "Set Up
Mode", then press PUSH ENTER.
3
Move the multi stick toward b or B
repeatedly to select "MD Set Up ?",
then press PUSH ENTER.
4
Move the multi stick toward b or B
repeatedly to select "MD Edit ?", then
press PUSH ENTER.
5
Move the multi stick toward b or B
repeatedly to select "REC Setup ?",
then press PUSH ENTER.
Move the multi stick toward b or B
repeatedly to select "S. Space On (or
Off)", then press PUSH ENTER.
42
Downloaded from:
Multi stick
PUSH ENTER
x
1
https://www.usersmanualguide.com/
6
Move the multi stick toward b or B
repeatedly to select "S. Space On", then
press PUSH ENTER.
"S. Space On" appears and the Smart Space
2
function is set to on.
7
When you want to start recording, press
MD NX. When you want to quit,
press x.
While Recording, if there is an extended
silence of 4 to 29 seconds, "Smart Space"
appears, the MD deck replaces the silence
with a blank of about 3 seconds and
continues recording. If there is no sound
input for
30 seconds, "Auto Cut" appears, the MD
deck replaces the silence with a blank of
about 3 seconds and enters recording pause.
To continue recording, press MD NX.
7
T o st op re c ording
Press x.
T o c a nc e l t he m e nu ope ra t ion
Press MODE SELECT.
T o t urn off t he Sm a rt Spa c e
func t ion
Select "S. Space Off" in step 6.
T ip
If you turn the power off or disconnect the power
cord, the MD deck will recall the last setting (on or
off) the next time you turn the power on.