Table of Contents
Advertisement
4
Set the time to start recording.
Press . or > repeatedly to set the
hour, then press ENTER.
The minute indication starts flashing.
1 2
REC
SLEEP
ALL DISCS
Press . or > repeatedly to set the
minute, then press ENTER.
The hour indication flashes again.
5
Set the time to stop recording
following the above procedure.
The start time, followed by the stop time,
the preset radio station to be recorded
(e.g., "TUNER FM 5") appear, then the
original display appears.
6
Insert a recordable tape.
7
Turn off the power.
When the recording starts, the volume
level is set to the minimum.
To check t he set t ing
Press CLOCK/TIMER SELECT and press
. or > repeatedly to select "REC", then
press ENTER.
To change the setting, start over from step 1.
To cancel t he t im er operat ion
Press CLOCK/TIMER SELECT and press
. or > repeatedly to select "TIMER
OFF", then press ENTER.
Not es
• If the power is on at the preset time, the recording
will not be made.
• You cannot set the timer if the starting time and
stopping time are the same.
• When you use the Sleep Timer, Timer-recording
will not turn on the system until the Sleep Timer
turns it off.
• You cannot activate Timer-recording and Daily
Timer at the same time.
Downloaded from:
VOLUME
https://www.usersmanualguide.com/
Opt ional com ponent s
Connect ing a udio
com ponent s
Select one of the following connections,
depending on the component to be connected
and method of connecting. Refer to the
ß
instructions of each component.
Connect ing an M D deck
f or digit al recording
You can record from CD into the MD deck
digitally by connecting an optional optical
cable.
To t he digit al input jack of t he M D deck
continued
37
Advertisement
Table of Contents
