Using The Pump - Polygroup Funsicle SkimmerPlus SFX600 User Manual

2. Slide close the Top Cover
Skimmer Canister
9
Pool Interior

Using the Pump

1. Locate a grounded receptacle at least 15 feet (4.5 m) away from the pool.
2a. If your pump includes a Power cord set without GFCI
power cord set
with Steps 5 and 6.
2b. If your pump includes a Power cord set with GFCI
set with GFCI
to 6 to operate.
3. The GFCI power cord set
a. Default timer setting: When the power is on, the display screen shows "10",
indicating that the default operating time of the pump is 10 hours.
The pump will automatically turn off after the 10 hours and will remain off
for 14 hours. This is based on a 24-hour cycle. This cycle will then continue as long as the power
is on.
b. Time adjustment: Press the "SET" button to set the desired operating time of the pump between
1 to 10 hours, with each press adjusts the time by 1 hour. For example, when the display screen on
the plug shows "05", the pump will work for 5 hours and restart after a 19 hours break.
c. If the display screen shows "0", it indicates that the pre-set working time has ended and the
pump is currently off.
d. To restart the pump earlier than the pre-set time, press the "SET" button. In this case, the pre-set
working time will adjust by 1 hour from the previous setting.
4. To turn off the pump, press the "TEST" button of the GFCI Plug, and unplug it from the power outlet.
If you accidentally press the "TEST" button while the pump is working, you can press the "RESET"
button to restore the pump to work.
onto the
5
.
9
5
to the power outlet to turn on the Pump. Then continue
j
to the power outlet to turn on the Pump. Then follow Steps 3
j
comes with a pre-set timer function.
j
3. You can now fill the pool with water up to
between the MIN and MAX markings on the
inside of Skimmer Canister
The water level should
be between the min
and max markers
located inside the
Skimmer Canister.
Max. Level
Min. Level
, simply plug in the
j
, plug in the power cord
j
14
.
9
Pool Interior
GFCI Plug with
Timer Function
j
*Do not connect to
another timer device