3. Put a water container (not included) under the Skimmer to collect water. Slide open the
Top Cover
, and take out the Strainer Basket
5
4. Have one person holding the Water Stopper and Skimmer Canister
unscrews the Motor Seal Nut
CAUTION: DO NOT PUSH OR PULL THE CANISTER as this may cause damage between the Canister
and pool liner.
1
5. Slowly take out the Motor Assembly
or Canister Gasket
4
.
1
9
. Be careful not to lose the Rubber Nozzle
3
.
4
You may need to reach inside the
Canister to free the Pump Motor.
3
2
and Filter Cartridge
g
19
.
7
, while the other person
9
2