Pioneer MAC-V700 Service Manual page 121

REAR PANEL
DATA input connectors
The video and audio output signals of another (additional)
DVD-ROM auto changes are connected here.
These con-
nectors are
provided for
use in the
future.
DIGITAL OUT
PCM/
1 2
1 2
CONTROL 1, 2 connectors
These are half-pitch 50-pin (comb-
shaped) SCSI connectors: one is con-
nected to the DVD/CD-ROM control con-
nector on the controller (MCO-V700),
and the other is connected to the CON-
TROL connector of another (additional)
DVD-ROM auto changer. The control
cable provided with the unit must be used
as the connecting cable.
DATA output connectors
These are the playback output connector for
background video or control music.
3
DATA
OUT
3
DATA
IN
Incoming power socket (AC IN)
This is connected to the dedicated power
outlet on the controller (MCO-V700) using
the accessory power cord.
NAMES OF THE PARTS
DATA1: Audio Rch
DATA2: Audio Lch
DATA3: Video
AC OUTLET
AC IN UNSWITCHED
60 W MAX
USE ONLY WITH PIONEER
MODEL MAC-V700.
SEE OPERATING
INSTRUCTIONS.
WARNINIG
THIS APPARATUS
MUST BE EARTHED.
Power outlet
(AC OUTLET)
The power cord of an-
other (additional) DVD-
ROM auto changer is
connected here.
Do not connect any unit
other than the DVD-ROM
auto changer to this out-
let.
MAC-V700
121