Table of Contents
Advertisement
MAC-V700
• Model Name Setting mode (Mode #31)
This is the mode for setting the model name of this unit. To enter this mode, press the [3] and [1] buttons successively while in initial status,
then the [ENT] button. The model name currently set will be displayed on the mode indicator. To update the model name, use the [1] and [3]
buttons. After updating, press and hold the [ENT] button for 4 seconds to register the new model name in memory. After registration, the unit
will enter Mode #30.
[ 3 ]
[ 1 ]
00
: No model name code
01
: MAC-V60
02
: MAC-V70
03
: Not specified
04
: MAC-V700
05 to 99 : Not specified
The serial number and model name being updated will be displayed on
the screen of a monitor connected via the monitor output port of the unit.
SERVICE MODE 3
SERIAL NO.
MODEL NAME
Note: Enter the actual model name code correctly.
102
[ ENT ]
Model name code
RITT000001JP
MAC-V700
[ ENT ]
4 sec.
to Mode #30
Change the model name code with
the [ 1 ] and [ 3 ] buttons (00 to 99).
Advertisement
Table of Contents
