Table of Contents
Advertisement
(14) List of Error Codes
In the indication expressed as "
The parameter "**" is a disc address (01 to 50). If a disc address is not known, "FF" is displayed.
The parameter "
" is the number (01, 02) of the player.
Error codes for warning : The following error codes are attributed to errors caused by remote operation errors or operation
Indication
01E40
No data input (serial number, model code, etc.)
01E41
Disc stocker removed during operation
Disc stocker not installed properly (incl. malfunction of the disc stocker switch)
02E42
Disc out of the disc stocker
E92
No disc (displayed only during an aging mode)
Error codes for "fatal" errors : The following error codes are attributed to errors judged as failures. These are stored in an error
Player error history (LUN 1, 2)
Error code
03E91
Spindle stop timeout
09E91
Clamping operation timeout
Changer error history (LUN 3)
Error code
01E44
Malfunction of the horizontal address sensor
01E45
Malfunction of the rotary encoder
01E46
Logical failure of the loading sensor
07E91
Loading operation timeout
08E91
Horizontal operation timeout
03E90
Unreturnable disc on the carriage (incl. malfunction of the disc sensor of the carriage)
04E90
Disc in a player cannot be clamped (incl. malfunction of the disc sensor of the carriage)
Error codes for information : The following error codes are attributed to errors caused by operational mistakes or inferior discs.
Decoder error history (LUN 0)
Error code
01E70
Defective SCSI IC
02E70
Defective decoder IC
03E70
Other defective IC
03E71
Inferior data from SCSI (PGCI or AV attribution data, etc.)
07E85
Overflow of SCSI interface buffer
08E85
SCSI interface parity error
01E88
Abnormal temperature
08E87
Failure in renewing flash memory
E89
Automatic cutoff of a player after failure (operation with only one player)
E
," "E
" is an error code in a strict sense, and "
mistakes. These are not stored in an error history.
Contents
history, and operation of the unit is stopped. An error indication is displayed, and if the error
occurs in response to a control command, an error code is returned.
Contents
Contents
These codes are stored in an error history, but operation of the unit continues.
Contents
MAC-V700
" is a detail code.
113
Advertisement
Table of Contents
