Indicators - Cisco Aironet 350 Series Hardware Installation Manual

Key Features

Indicators

The three indicators on top of the access point report Ethernet activity, association status, and radio
activity. The indicators are labeled in
Figure 1-1
Figure 1-2
•
•
•
Hardware Installation Guide for Cisco Aironet 350 Series Access Points Running Cisco IOS Software
1-4
D r a f t 1 - C I S C O C O N F I D E N T I A L
Indicators on the 350 Series Access Point
CISCO AIRONET 350
W I R E L E S S A C C E S S P O I N T
S
Indicators on the 350 Series Metal Case Access Point
CISCO AIRONET 350
W I R E L E S S A C C E S S P O I N T
The Ethernet indicator signals Ethernet traffic on the wired LAN. This indicator blinks green when
a packet is received or transmitted over the Ethernet infrastructure. The indicator blinks red when
the Ethernet cable is not connected.
The association status indicator signals operational status. Blinking green indicates that the access
point is operating normally but is not associated with any wireless client devices. Steady green
indicates that the access point is associated with at least one wireless client device.
The radio indicator blinks green to indicate radio traffic activity. The light is normally off, but it
blinks green whenever a packet is received or transmitted over the access point radio.
Figure 1-1 and Figure
SERIES
Ethernet
Status
Radio
SERIES
Ethernet
ETHERNET ACTIVITY
Status
ASSOCIATION STATUS
Radio
RADIO ACTIVITY
Chapter 1
1-2.
Overview
OL-7467-01