Table of Contents
Advertisement
If available, and after the machine has been running for several hours, measure the
vibrations or SPM-values from the SPM-nipples, and record the values for future
reference use.
5.8 Shut down
The shut-down of the machine depends on the application, but main guidelines are:
1. Reduce the output of the machine to zero.
2. Open the main breaker.
3. Switch the machine excitation off (when applicable).
4. Stop the engine.
5. Switch the anti-condensation heaters on if not automatically done by
switchgear.
Page 34
Advertisement
Table of Contents
