NORTH AMERICA – GFCI INSTALLATION
Installation of the GFCI - Circuit Breaker, including ampere sizing and selection of conductor size
and type, must be performed by a qualified electrician in accordance with the National Electrical
Code, or the Canadian Electrical Code, and all Federal, State/Provincial and local codes and regula-
tions in effect at the time of installation. Hydropool highly recommends the use of a new Siemens
GFCI breaker for all of its products. Other GFCI's and older Siemen's GFCI's may have tripping is-
sues.
240 VOLT AQUASPORT
SINGLE GFCI WIRING
(MASTER ONLY)
240 VOLT SWIMSPA
SINGLE GFCI WIRING
MASTER / SLAVE HEATER
240 VOLT SWIMSPA
DUAL GFCI WIRING
MASTER / SLAVE HEATER
NOTICE
15