PIONEER DJ serato DDJ-FLX10 Instruction Manual page 93

 Using Beat FX
1 Press the [BEAT ] button or [BEAT ] button while holding the
[SHIFT] button.
Selects the BPM measurement mode.
– [AUTO]: Press the [BEAT ] button while holding the [SHIFT] button. The
BPM is automatically measured from the input audio signal.
– [TAP]: Press the [BEAT ] button while holding the [SHIFT] button. You can
now enter the BPM manually by tapping the [TAP] button.
2 Turn the [BEAT FX] select knob.
Selects a type of effect.
The first effect type on the FX1 unit in rekordbox will be changed.
3 Turn the BEAT FX CH select knob.
Selects a channel to apply the effect to.
– [SP]: Applies the effect to the sampler sound.
– [MIC]: Applies the effect to the microphone sound.
– [1] to [4]: Applies the effect to the sound of the respective channel.
– [MST]: Applies the effect to the sound of the master channel.
• For microphone sound and external input sound, the effect from the unit will
be applied.

Read: Beat FX types on the unit (page 94)
4 Press the [BEAT ] button or [BEAT ] button.
Sets the number of beats synchronized to the effect sound.
The effect time corresponding to the number of beats is set automatically.
5 Press the [BEAT FX ON/OFF] button.
The effect is applied to the sound.
You can adjust the effect's parameter by turning the [BEAT FX LEVEL/
DEPTH] knob.
The [BEAT FX ON/OFF] button flashes when the effect is on.
• Press the [BEAT FX ON/OFF] button again to turn the effect off.
93
En
rekordbox