PIONEER DJ serato DDJ-FLX10 Instruction Manual page 101

Effect
FILTER
Using FX Part Select
The effect applies to the selected part (Drums / Vocal / INST) of the
loaded track.
• The effect applies to all parts when using sound from the external
inputs, microphone, or sampler.
1 Select a part, or multiple parts, with the [FX PART SELECT]
buttons.
Press [DRUMS], [VOCAL], or [INST] button and the button will light up. The
effect applies to all parts with lit buttons.
2 Apply an effect.
When the sound is applied with Beat FX, Sound Color FX, or Pad FX, the effect
applies to the selected part only.
 Read: Using Beat FX (page 92)
 Read: Using Sound Color FX (page 99)
 Read: Using Pad FX (page 80)
To cancel FX Part Select
When all [FX PART SELECT] ([VOCAL], [DRUMS], [INST]) buttons
light up, the effect applies to all parts, which means FX Part Select is
canceled.
Explanation
Outputs sound that has passed through a
filter.
• COLOR:
Turn counterclockwise: Gradually
decreases the low-pass filter's cut-off
frequency.
Turn clockwise: Gradually increases the
high-pass filter's cut-off frequency.
101
En
rekordbox