PIONEER DJ serato DDJ-FLX10 Instruction Manual page 81

To use Pad FX mode 2, press the [PAD FX1] mode button while holding
the [SHIFT] button.
Effects are set to the Performance Pads as follows:
• For 16 effects assigned to the pads, you can switch to Effect Q through X by
pressing the [PAGE ] button, and Effect Y through AF by pressing the
[PAGE ] button. Also, the Pad FX display on the deck screen in rekordbox
will be switched.
When you press the [PAGE ] button
1: Effect Q, 2: Effect R, 3: Effect S, 4: Effect T,
5: Effect U, 6: Effect V, 7: Effect W, 8: Effect X
When you press the [PAGE ] button
1: Effect Y, 2: Effect Z, 3: Effect AA, 4: Effect AB,
5: Effect AC, 6: Effect AD, 7: Effect AE, 8: Effect AF
2 Press and hold down a Performance Pad.
The effect turns on. The sound changes according to the type of effect and the
number of beats in the settings assigned to that pad.
3 Release the Performance Pad.
The effect turns off.
Using Release FX of Pad FX
You need to assign a Release FX to a Performance Pad in advance.
1 Press and hold down a Performance Pad that has an effect other
than a Release FX assigned to it.
The effect turns on. The sound changes according to the type of effect and the
number of beats in the settings assigned to that pad.
1 2 3
5 6 7
81
En
rekordbox
4
8