PIONEER DJ serato DDJ-FLX10 Instruction Manual page 162

Setting item
Slip button LED while Slip
mode is on
Fader Start options
JOG RING COLOR
Time Mode
Display HOT CUE
INDICATOR
REC OUT
Changing the settings
Explanation
Sets the lighting of the [SLIP] button when
Slip mode is on (when [Serato DJ Pro] is
selected as the software).
Light is on: Lights when Slip mode is on, and
flashes when Slip is being used.
Blink: Flashes constantly when Slip mode is
on.
Select [ON] to enable the Fader Start
function (when [Serato DJ Pro] or [Other
software] is selected as the software).
Check the checkbox to also enable the
Sync function when using Fader Start.
 Read: Using Fader Start (page 139)
Selects the lighting color of the jog ring
illumination from [MODE 1], [MODE 2], and
[MODE 3] (when [Serato DJ Pro] is
selected as the software).
Sets the time display format ([Elapsed] or
[Remaining]) on the Waveform mode
screen of the On Jog Display (when [Serato
DJ Pro] is selected as the software).
Displays Hot Cues on Virtual Deck mode of
the On Jog Display (when [Serato DJ Pro]
is selected as the software).
If this setting isn't selected, Hot Cue
information is displayed the same as it is on
Serato DJ Pro's virtual deck when Virtual
Deck mode is selected.
Sets the microphone's output ([WITH MIC]
or [WITHOUT MIC]) for recording (when
[Serato DJ Pro] or [Other software] is
selected as the software).
162
En