PIONEER DJ serato DDJ-FLX10 Instruction Manual page 88

2 Press the [CUE/LOOP CALL ] button while holding the [SHIFT]
button.
The cue point or loop point is deleted.
Using Slip
If you turn Slip mode on, normal playback continues in the background
while you scratch, play a loop, or play a Hot Cue. When you stop
scratching or playing the loop or Hot Cue, normal playback resumes
from the position reached in the background.
• The [SLIP] button lights up when Slip mode is on, and flashes during
playback in the background.
 Slip Scratch Play
1 Make sure Vinyl mode is turned on.
Check that the [SLIP] button lights up while holding the [SHIFT] button.
• For the default setting, Vinyl mode is on.
2 Press the [SLIP] button.
The unit enters Slip mode.
3 To scratch the track, turn the top of the jog wheel during playback.
Normal playback continues in the background while you're scratching.
4 Release the top of the jog wheel.
Playback starts from the position reached in the background.
• To cancel Slip mode, press the [SLIP] button again.
 Slip Hot Cue
1 Press the [HOT CUE] mode button.
The unit enters Hot Cue mode.
2 Press the Performance Pad to set the Hot Cue.
88
En
rekordbox