PIONEER DJ serato DDJ-FLX10 Instruction Manual page 89

3 Press the [SLIP] button.
The unit enters Slip mode.
4 Press and hold a Performance Pad during playback.
Playback starts from the Hot Cue point. While holding the pad, playback
continues.
Normal playback continues in the background during Hot Cue playback.
5 Release the Performance Pad.
Playback starts from the position reached in the background.
• To cancel Slip mode, press the [SLIP] button again.
 Slip Braking
1 Adjust the [Vinyl Speed Adjust] - [Touch/Brake] setting in the
[Preferences] > [Controller] > [Deck] tab in rekordbox.
With the [Vinyl Speed Adjust] setting, you can adjust the speed at which a
track slows down until it stops.
When using Slip Braking, adjust [Touch/Brake] of [Vinyl Speed Adjust] to
stop slowly.
2 Press the [SLIP] button.
The unit enters Slip mode.
3 Press the [PLAY/PAUSE ] button during playback.
Playback slows down gradually and stops. Normal playback continues in the
background.
4 Press the [PLAY/PAUSE ] button again.
Playback starts from the position reached in the background.
• To cancel Slip mode, press the [SLIP] button again.
 Slip Auto Beat Loop
1 Press the [SLIP] button.
The unit enters Slip mode.
89
En
rekordbox